Post by Casethecorvetteman on Mar 28, 2016 7:01:57 GMT -5
i did some further setup today to compare my computer to the OPPO 103D on the Barco Cine 9.
After setting up the PC on 1920x1080 @48hz via HDMI into the internal MOOME and getting the colour balance as good as i could, it seems very sharp and clear, but when checking clipping the red and blue pass, but the green does not.
I am only able to use the OPPO at 60Hz, which is not quite as sharp with Darbee turned off, but setting Darbee to about 35-40 makes it look sharper and more detailed than the PC.
I have Power DVD 13 ULTRA, but i cant find any settings that are simular to the Darbee.
The clipping does not seem to be an issue with the OPPO either, not sure why it is with the PC, or why it only affects green.
Have you tried HPC-HC? Despite its simple look it is a very powerfull software including many audio and video filters. Video filters usualy using the GPUs shader processors, they include like sharpen complex etc. But of course you can play with the video card's "built in" video enhacement effects as well. The problem of the green clipping isn't caused by the 16-235 <-> 0-255 output mismatch?
During the testing I made with the H-DEF retrace evaluation on the XG, I found that timings that has less blanking time than what XG likes will cause immediate streaking and different color/brightness problems due to tight video clamping. The XG has -unfortunately - way too much blanking time in the 30-77KHz range for standard HD timings. For these my idea on taking over the control of retrace times in the XG can be a good solution -if it works...
zjjxhzf: hello Gabor i am DLP projectorColor wheel is not accurate，setup memory， the phase angle cant setting for the color wheel ，must use service code.
Sept 19, 2017 1:31:25 GMT -5
mastertech: Hi stranger. Guess you spent your summer cruising on that street bike.
Sept 17, 2017 21:43:54 GMT -5
nashou: Hey everyone, just saying hi ! Hvent been here for a while hope you're all doing well !!
Sept 17, 2017 19:19:25 GMT -5
mastertech: Parts for repair are no longer available.
Sept 11, 2017 19:42:24 GMT -5
mayavi: my pioneer elite VSX-92TXH it freezes until I unplug and then it won't power on until maybe 10 minutes. came to know that its a common problem in this model. any help would be much appreciated......
Sept 11, 2017 13:39:10 GMT -5
jaredjaric: Thanks so much Hulio :), your expertise is very much respected
Aug 20, 2017 9:25:37 GMT -5
Admin: james: you need to post in the thread where your problem is being discussed.
Aug 9, 2017 19:51:54 GMT -5
james: Yes Sir All wiring was connected.
Aug 9, 2017 7:46:15 GMT -5
Admin: I have uploaded a copy of the SM to the digital projector section.
Jan 10, 2017 20:21:56 GMT -5
ducki: sorrry for my bad english ....(google translate
Jan 10, 2017 17:44:21 GMT -5
ducki: I have the same defect as a cp-x4021n you but can not start it ... I did the same trials with ic202 pc102 and still do not like, I make short pin 1 and 2 of the pc102 and PJ light (orange) goes off ... you can help me with a service manual for this PJ? TNX
Jan 10, 2017 17:43:46 GMT -5
jlb12: pwr switch off = 2(0.0) 3(11.7) 6(.04) 7(.04)
Dec 13, 2016 23:27:03 GMT -5
jlb12: No Problem. Thank you for all your help.
Dec 13, 2016 0:20:40 GMT -5