Post by analogrocks on Apr 16, 2016 0:45:57 GMT -5
I was wondering if there's an easy way to change the RF modulated signal on an Over The Air ATSC tuner box to make it output on a CATV channel other than channel 2,3 or 4?
I want to make a mini TV headend on the cheap here. We get 25 channels OTA. I'm wondering if there's an easy way to make the RF output tune to a different channel? Firmware hack? New crystal frequency ( wishful, and old thinking? lol ) I'd like to make a good old Analog cable system for my own use in my own place.
Without knowing the actual circuit/model it is hard to say how to do it. If you want all the 25 channels on a different frequency simoultaneosly you also need 25 ATSC tuner, are you sure that's the cheap end?
zjjxhzf: hello Gabor i am DLP projectorColor wheel is not accurate，setup memory， the phase angle cant setting for the color wheel ，must use service code.
Sept 19, 2017 1:31:25 GMT -5
mastertech: Hi stranger. Guess you spent your summer cruising on that street bike.
Sept 17, 2017 21:43:54 GMT -5
nashou: Hey everyone, just saying hi ! Hvent been here for a while hope you're all doing well !!
Sept 17, 2017 19:19:25 GMT -5
mastertech: Parts for repair are no longer available.
Sept 11, 2017 19:42:24 GMT -5
mayavi: my pioneer elite VSX-92TXH it freezes until I unplug and then it won't power on until maybe 10 minutes. came to know that its a common problem in this model. any help would be much appreciated......
Sept 11, 2017 13:39:10 GMT -5
jaredjaric: Thanks so much Hulio :), your expertise is very much respected
Aug 20, 2017 9:25:37 GMT -5
Admin: james: you need to post in the thread where your problem is being discussed.
Aug 9, 2017 19:51:54 GMT -5
james: Yes Sir All wiring was connected.
Aug 9, 2017 7:46:15 GMT -5
Admin: I have uploaded a copy of the SM to the digital projector section.
Jan 10, 2017 20:21:56 GMT -5
ducki: sorrry for my bad english ....(google translate
Jan 10, 2017 17:44:21 GMT -5
ducki: I have the same defect as a cp-x4021n you but can not start it ... I did the same trials with ic202 pc102 and still do not like, I make short pin 1 and 2 of the pc102 and PJ light (orange) goes off ... you can help me with a service manual for this PJ? TNX
Jan 10, 2017 17:43:46 GMT -5
jlb12: pwr switch off = 2(0.0) 3(11.7) 6(.04) 7(.04)
Dec 13, 2016 23:27:03 GMT -5
jlb12: No Problem. Thank you for all your help.
Dec 13, 2016 0:20:40 GMT -5