|
|
Post by Casethecorvetteman on Mar 29, 2017 23:19:04 GMT -5
Hi all  got a mate with a PVM that has a colour bleed issue, the capacitors have been replaced and still seems to have the problem, which didnt seem affected by replacing caps. |
|
|
|
Post by ratty on May 17, 2017 16:37:24 GMT -5
I'm no authority on the subject, but if the colour's all bleeding out one side, check the colour drive transistors. I've had incorrectly replaced or dying transistors on neckboards cause that with arcade monitors. Also check any resistors in the drive circuit, they can also cause a transistor to go 'lazy' and cause a bleeding effect.
|
|
|
|
Post by Casethecorvetteman on May 19, 2017 20:05:35 GMT -5
Cheers mate, ive always been able to fix it with capacitors, but in this instance it didnt do it, and its not mine, so i cant see or test anything, makes it hard.
|
|
