Post by stridsvognen on Apr 16, 2017 4:24:27 GMT -5
No idea, it might be integratd in the main processor.
The + is just unlocked to 200Mhz, im sure there is a code to unlock the feature, if you can source that one you could test and see if it operates at 200Mhz stable, if i remember right they spec the + to 188Mhz, mine runs smooth at 200Mhz.
Looks like you got your foot in the back door of a Lumagen repair workshop with all those defective and loos processor boards.. Im sure you will have a lot of fun troubleshooting and putting stuff together that can be used.
Post by stridsvognen on Apr 16, 2017 12:37:38 GMT -5
I wondering if it can be setting related, but if you did a factory reset and saved it, it should not be, or i guess i would have it as well on my xs in factory settings. You can upload the device setup, so it can be passed to a different device, if you do that i can try see if i can pass it to mine, if i can do a backup and feed it my own settings again, long time i did not do that.
I do not think that the issue is settings related. I tried to change many different settings, sources, cables, power supplies, displays, but the noise disappears only when sets the film mode or game mode.
Post by stridsvognen on Apr 16, 2017 17:26:16 GMT -5
there is a bias setting for auto deinterlacing mode, whats that at.. make sure its not turned all up or down so it pushes the deinterlacing in a specifik mode, and see that reinterlacing is off. What is the source format.? it must be douing some sort of deinterlacing or reinterlacing if changing the deinterlacing mode have a effect.
zjjxhzf: hello Gabor i am DLP projectorColor wheel is not accurate，setup memory， the phase angle cant setting for the color wheel ，must use service code.
Sept 19, 2017 1:31:25 GMT -5
mastertech: Hi stranger. Guess you spent your summer cruising on that street bike.
Sept 17, 2017 21:43:54 GMT -5
nashou: Hey everyone, just saying hi ! Hvent been here for a while hope you're all doing well !!
Sept 17, 2017 19:19:25 GMT -5
mastertech: Parts for repair are no longer available.
Sept 11, 2017 19:42:24 GMT -5
mayavi: my pioneer elite VSX-92TXH it freezes until I unplug and then it won't power on until maybe 10 minutes. came to know that its a common problem in this model. any help would be much appreciated......
Sept 11, 2017 13:39:10 GMT -5
jaredjaric: Thanks so much Hulio :), your expertise is very much respected
Aug 20, 2017 9:25:37 GMT -5
Admin: james: you need to post in the thread where your problem is being discussed.
Aug 9, 2017 19:51:54 GMT -5
james: Yes Sir All wiring was connected.
Aug 9, 2017 7:46:15 GMT -5
Admin: I have uploaded a copy of the SM to the digital projector section.
Jan 10, 2017 20:21:56 GMT -5
ducki: sorrry for my bad english ....(google translate
Jan 10, 2017 17:44:21 GMT -5
ducki: I have the same defect as a cp-x4021n you but can not start it ... I did the same trials with ic202 pc102 and still do not like, I make short pin 1 and 2 of the pc102 and PJ light (orange) goes off ... you can help me with a service manual for this PJ? TNX
Jan 10, 2017 17:43:46 GMT -5
jlb12: pwr switch off = 2(0.0) 3(11.7) 6(.04) 7(.04)
Dec 13, 2016 23:27:03 GMT -5
jlb12: No Problem. Thank you for all your help.
Dec 13, 2016 0:20:40 GMT -5