What the topic says, looking for one more set of HD18 lenses (would prefer the lenses with aluminium housings as that is what my other set is) with C-elements, plus a set of 8" tubes if the price is right (Barco LC housings on them are a plus!). If you have anything of the sort, send me a PM please!
Im not sure either gjaky. Honestly, i bought them many years ago thinking of doing the mods on the bd808 data at some stage but never happen. Ever since i had the 909 working, the tubes had been in the box unmolested. If the p16s that would help ratty why not. As of the serial im only stating whats on the tubes. Pls refer pix. By the way, i really enjoy everyone's work here. It amazing the amount talent that everyone chips in this forum. Best of luck..
Some further reading suggests that the reds were used in G70 sets, the blue and green not, but they should be electronically compatible. I have to wonder how sharp these might be compared to LNP tubes?
Ratty, the XG and G70 uses P16LJE tubes yet they have the same dimensions as the E8508 tubes found in your PGs, only that the P16LJE tubes usualy have a 2cm longer neck than the E8508 tubes. But you can check how the PG tubes would fit in the Barco housings, the thin neck would be still an issue though...
I actually checked the tube bell dimensions between the P16s in the barco LC housings and the E8508 tubes, and they're pretty much the same, also matching with the Toshiba tubes used in some arcade game RP sets. But yeah the thin neck is definitely a problem, not to mention the shipping and asking price are out of my league.
At the moment though my focuse shifted back to the lenses, as I have a BD808LC with pristine p16 tubes on it's way to me. With that, I should be good to go for the blend once I swap the electronics around and get a set of lenses to match the others.
zjjxhzf: hello Gabor i am DLP projectorColor wheel is not accurate，setup memory， the phase angle cant setting for the color wheel ，must use service code.
Sept 19, 2017 1:31:25 GMT -5
mastertech: Hi stranger. Guess you spent your summer cruising on that street bike.
Sept 17, 2017 21:43:54 GMT -5
nashou: Hey everyone, just saying hi ! Hvent been here for a while hope you're all doing well !!
Sept 17, 2017 19:19:25 GMT -5
mastertech: Parts for repair are no longer available.
Sept 11, 2017 19:42:24 GMT -5
mayavi: my pioneer elite VSX-92TXH it freezes until I unplug and then it won't power on until maybe 10 minutes. came to know that its a common problem in this model. any help would be much appreciated......
Sept 11, 2017 13:39:10 GMT -5
jaredjaric: Thanks so much Hulio :), your expertise is very much respected
Aug 20, 2017 9:25:37 GMT -5
Admin: james: you need to post in the thread where your problem is being discussed.
Aug 9, 2017 19:51:54 GMT -5
james: Yes Sir All wiring was connected.
Aug 9, 2017 7:46:15 GMT -5
Admin: I have uploaded a copy of the SM to the digital projector section.
Jan 10, 2017 20:21:56 GMT -5
ducki: sorrry for my bad english ....(google translate
Jan 10, 2017 17:44:21 GMT -5
ducki: I have the same defect as a cp-x4021n you but can not start it ... I did the same trials with ic202 pc102 and still do not like, I make short pin 1 and 2 of the pc102 and PJ light (orange) goes off ... you can help me with a service manual for this PJ? TNX
Jan 10, 2017 17:43:46 GMT -5
jlb12: pwr switch off = 2(0.0) 3(11.7) 6(.04) 7(.04)
Dec 13, 2016 23:27:03 GMT -5
jlb12: No Problem. Thank you for all your help.
Dec 13, 2016 0:20:40 GMT -5