|
|
Post by jaredjaric on Apr 16, 2018 9:20:28 GMT -5
Hi guys,
Am back again and need valuable inout from the experts. After having the dreaded red led on the eht board, i switched out the quads and multiple eht boards.
Only to find out it was the splitter, but now the whole image(RGB) is modulating in and out of focus, and totally went out of focus after thirty minutes.
What should i look out for? the splitter or the focus board. I have tried a different quad , but it still persists.
Hope to hear from the experts here.
Cheers,
|
|
|
|
Post by jaredjaric on Apr 16, 2018 10:29:14 GMT -5
Hi guys, Am back again and need valuable inout from the experts. After having the dreaded red led on the eht board, i switched out the quads and multiple eht boards. Only to find out it was the splitter, but now the whole image(RGB) is modulating in and out of focus, and totally went out of focus after thirty minutes. What should i look out for? the splitter or the focus board. I have tried a different quad , but it still persists. Hope to hear from the experts here. Cheers, swapped in a new focus board just now, the focus came back but still modulating. its like some kind of resistor failing causing the image to slightly go in and out of focus. |
|
|
|
Post by jaredjaric on Apr 17, 2018 12:03:17 GMT -5
issue fixed, it was another bad splitter.
The third splitter fixed it.
|
|
|
|
Post by mastertech on Apr 17, 2018 14:07:07 GMT -5
Good to hear. Glad you got it worked out.
|
|
|
|
Post by jaredjaric on Apr 19, 2018 19:04:01 GMT -5
Good to hear. Glad you got it worked out. Thanks M , My family is still enjoying movies on this PJ every night. Cheers, |
|
|
|
Post by Casethecorvetteman on May 3, 2018 6:17:34 GMT -5
Good to hear. Glad you got it worked out. Sorry i havent been around, i was going to say the only item that really causes that issue is the splitter, ive had a couple do that. |
|
|
|
Post by mastertech on May 3, 2018 13:56:56 GMT -5
Yeah, where you been Case? Everything ok?
|
|
|
|
Post by jaredjaric on Sept 16, 2020 7:33:07 GMT -5
Good to hear. Glad you got it worked out. Sorry i havent been around, i was going to say the only item that really causes that issue is the splitter, ive had a couple do that. Can not believe this, it is another splitter issue causing this.
on my recent thread , i was trying all other boards to close in on the situation, and never thought that this same scenario can happen.
everyone was right, it was all in the three HV section ONLY. and it was the splitter again and again.
|
|
