The pics I'm trying to use are in jpg format and under 1meg. I'm trying to insert the attachment first, and then enter text under it. It only allows me to put the pic in, smaller than it opens locally on my computer but when I try to enter text the pic highlights blue like it's been selected and that's it. Can't type anything or un-highlight the pic. I have to abandon the attempt to get out. Previewing without posting it does nothing. Pic sits there highlighted. No finger cursor on pic to enlarge it either. What am I not doing? Thanks!
Last Edit: Feb 23, 2014 21:40:19 GMT -5 by justgreg
To have a larger picture you have to use an image hosting site and use the "insert image" selection. Otherwise, the forum only allows the smaller picture that you can click on and make larger.
Use the BBCode tab at the bottom of the creat post section and you can highlight and move around both the text and image to where ever you want. You can then check the appearance with the preview and if you want to make more changes select the BBCode tab again until you get it how you like.
zjjxhzf: hello Gabor i am DLP projectorColor wheel is not accurate，setup memory， the phase angle cant setting for the color wheel ，must use service code.
Sept 19, 2017 1:31:25 GMT -5
mastertech: Hi stranger. Guess you spent your summer cruising on that street bike.
Sept 17, 2017 21:43:54 GMT -5
nashou: Hey everyone, just saying hi ! Hvent been here for a while hope you're all doing well !!
Sept 17, 2017 19:19:25 GMT -5
mastertech: Parts for repair are no longer available.
Sept 11, 2017 19:42:24 GMT -5
mayavi: my pioneer elite VSX-92TXH it freezes until I unplug and then it won't power on until maybe 10 minutes. came to know that its a common problem in this model. any help would be much appreciated......
Sept 11, 2017 13:39:10 GMT -5
jaredjaric: Thanks so much Hulio :), your expertise is very much respected
Aug 20, 2017 9:25:37 GMT -5
Admin: james: you need to post in the thread where your problem is being discussed.
Aug 9, 2017 19:51:54 GMT -5
james: Yes Sir All wiring was connected.
Aug 9, 2017 7:46:15 GMT -5
Admin: I have uploaded a copy of the SM to the digital projector section.
Jan 10, 2017 20:21:56 GMT -5
ducki: sorrry for my bad english ....(google translate
Jan 10, 2017 17:44:21 GMT -5
ducki: I have the same defect as a cp-x4021n you but can not start it ... I did the same trials with ic202 pc102 and still do not like, I make short pin 1 and 2 of the pc102 and PJ light (orange) goes off ... you can help me with a service manual for this PJ? TNX
Jan 10, 2017 17:43:46 GMT -5
jlb12: pwr switch off = 2(0.0) 3(11.7) 6(.04) 7(.04)
Dec 13, 2016 23:27:03 GMT -5
jlb12: No Problem. Thank you for all your help.
Dec 13, 2016 0:20:40 GMT -5