I am flooded with CD player repairs now.. this is a fancy Sony SCD-777ES. The problem is: from cold start it reads plain CD-s well, and reads the plain CD layer of the SACDs too, but not reads the SACDs, however, after ~1,5 hours of continuous playing it reads SACDs too! This machine has an odd dual pickup setup, one for the SACD one for the plain CD, not sure how to narrow down the problem. I started with checking the supply lines and there is no ripple on any of them, and they all have the right voltage too. Any suggestion what to check?
Well that is something what I couldn't check yet, this is a top loading player, the pick up mechanism is fixed, and the spindle motor is moved instead, there are multiple safety sensors for checking if the door is closed and is the disc stabiliser in place? I haven't figured out yet how to override them.
This is just "SCD-777ES" I was also confused about the manuals, but it seems the manual for the SCD-1/777ES covers this machine pretty well, I think the SCD-1 just has differently shaped power button, and offers balanced signal out.
I have similar problem with my SCD-777es too. When it starts from cold, it usually has difficulty to play SACD. It just got stuck many times before the song can be finished. But the machine play SACD flawless after around 1.5 hours of warm-up. Is there anything wrong with the electronics of the player? Or does this mean the laser head is going to be dead soon?
The connectors of the pick-up were reconnected a few times due to measurements, and once it just started to play SACDs from cold as well. And is working fine since then, without replacing anything in it.
zjjxhzf: hello Gabor i am DLP projectorColor wheel is not accurate，setup memory， the phase angle cant setting for the color wheel ，must use service code.
Sept 19, 2017 1:31:25 GMT -5
mastertech: Hi stranger. Guess you spent your summer cruising on that street bike.
Sept 17, 2017 21:43:54 GMT -5
nashou: Hey everyone, just saying hi ! Hvent been here for a while hope you're all doing well !!
Sept 17, 2017 19:19:25 GMT -5
mastertech: Parts for repair are no longer available.
Sept 11, 2017 19:42:24 GMT -5
mayavi: my pioneer elite VSX-92TXH it freezes until I unplug and then it won't power on until maybe 10 minutes. came to know that its a common problem in this model. any help would be much appreciated......
Sept 11, 2017 13:39:10 GMT -5
jaredjaric: Thanks so much Hulio :), your expertise is very much respected
Aug 20, 2017 9:25:37 GMT -5
Admin: james: you need to post in the thread where your problem is being discussed.
Aug 9, 2017 19:51:54 GMT -5
james: Yes Sir All wiring was connected.
Aug 9, 2017 7:46:15 GMT -5
Admin: I have uploaded a copy of the SM to the digital projector section.
Jan 10, 2017 20:21:56 GMT -5
ducki: sorrry for my bad english ....(google translate
Jan 10, 2017 17:44:21 GMT -5
ducki: I have the same defect as a cp-x4021n you but can not start it ... I did the same trials with ic202 pc102 and still do not like, I make short pin 1 and 2 of the pc102 and PJ light (orange) goes off ... you can help me with a service manual for this PJ? TNX
Jan 10, 2017 17:43:46 GMT -5
jlb12: pwr switch off = 2(0.0) 3(11.7) 6(.04) 7(.04)
Dec 13, 2016 23:27:03 GMT -5
jlb12: No Problem. Thank you for all your help.
Dec 13, 2016 0:20:40 GMT -5