|
Post by sakharov on Apr 6, 2018 8:13:43 GMT -5
I've two complete BG808s for sale. One has lens with color filters. All tubes are around 8-9
|
|
|
Post by sakharov on Feb 15, 2018 16:51:33 GMT -5
Hey guys,
I have a Lexicon Ldd1 that lights up but is unable to lock to a AC3 RF output of my DVL919e. Can anyone help me?
regards
|
|
|
Post by sakharov on Sept 3, 2017 14:46:09 GMT -5
Dear Friends,
Currently i'm facing a small problem. I've replace the power guard lamps from my Mcintosh Mc 2200 by bi pin led and all the 4 lamps remain on. The is working well, I believe I would need to add a voltage limiting resistor, is this correct?
|
|
|
Post by sakharov on Jun 13, 2017 6:31:36 GMT -5
Dear Friends,
I'm facing a problem with one of my krell fpb 250m mono blocks. One of the mono blocks on stand by position sometimes turns down the main electric board. the same mono block if the power socket is inserted on the wall socket in one position everything works well, but if I invert the position it also turns down the main electrical board.
This is really strange situation. can anyone give me a clue on what is going on?
|
|
|
Post by sakharov on May 12, 2017 6:45:44 GMT -5
Would a Crystallio scaler solve this?
|
|
|
Post by sakharov on Apr 24, 2017 9:40:09 GMT -5
Ok guys, thanks to the suggestions of you all the Cinemax is working great. Meanwhile on my initial test at 1080p with bluray and the adapter fury 3 I've a vertical band on the left side of the image. Any insides on this?
|
|
|
Post by sakharov on Apr 19, 2017 7:36:25 GMT -5
Switch the neck boards and everything ok now,but...(there is always a but with crt)...trying to set the image I cannot overlap the crosshair. What ever adjustment I cannot overlap it vertically. The blue and the red cross are always lower...Meanwhile I've also noticed that when the sockets are physically positioned for the front selling position the menu indicates back table...what the hell.!!!
Any ideas?
|
|
|
Post by sakharov on Apr 18, 2017 9:24:42 GMT -5
Hey guys,
Switching the splitter worked!!!!
But now after a few minutes I lose the green. It fades away. If I switch the barco on and off I get it again and then after a few minutes it goes of again. What the he'll is going on?
|
|
|
Post by sakharov on Apr 17, 2017 8:00:45 GMT -5
I've just replace the quad with th one from my Bg808s with no luck. I'll replace the splitter next (also from the working bg808s)
|
|
|
Post by sakharov on Apr 17, 2017 6:08:21 GMT -5
Hey guys,
The red light is on even when all tubes HV is unplugged.
Regarding the moisture suggestion, how did you solve it?
|
|
|
Post by sakharov on Apr 16, 2017 17:08:44 GMT -5
Hi Guys,
I've just replaced the glycol in the blue tube of my cinemax (due to fungus). Upon assembling everything correctly I powered up the project and it ran ok for like 2 min. Suddenly it switch off by itself. When I powered it again the tubes don't light up but the projector is running. EHT board has a red led on all the other leds are green. What the hell happened? Can any one help me?
Thank you
regards
|
|