nashou
Unmoderated Off Topic
Tech in Training.....
Posts: 1,239
|
Post by nashou on Feb 23, 2017 22:56:12 GMT -5
You must have a broken trace. These 4 pins are all tied together and should all have the same voltage. You might be right. there is through hole near that pin that has 5.5 volts and I think it goes to that pin.
|
|
nashou
Unmoderated Off Topic
Tech in Training.....
Posts: 1,239
|
Post by nashou on Feb 23, 2017 23:18:26 GMT -5
Woo Hoo !!!!! Added a solder blob to that through hole and the amp works !!! No voltage at the transistor so I will install it and all should be good !
Nashou
|
|
nashou
Unmoderated Off Topic
Tech in Training.....
Posts: 1,239
|
Post by nashou on Feb 23, 2017 23:29:24 GMT -5
Q702 installed and amp turns on and display buttons all function !!!
Will have to test it out tomorrow some time.
Thanks Mac !!!
Nashou
|
|
|
Post by mastertech on Feb 24, 2017 15:45:55 GMT -5
Well that is good news. Glad to hear you got it running.
|
|