|
Post by tibimakai on Jul 28, 2021 10:00:13 GMT -5
How many times it clicks?
|
|
|
Post by tibimakai on Jul 28, 2021 14:04:03 GMT -5
There is only one click, or two? If there is only one, than it is some amp section protection mode. If you hear the second click, than it has tested the amp section, and turned on the speaker outputs. Did you insert the ribbon cables correctly?
|
|
|
Post by tibimakai on Aug 2, 2021 10:38:25 GMT -5
Once I have picked up one with no display, and found out that the ribbon cable was cut narrower than the connector, and it shifted a bit. Because of this, did not have display.
|
|