This is the main board of 2144 model (the top of the Lumagen series) but the videoprocessor have only this board built in so it working fine also without chassis. Missing analogic input connectors. The price of new complete unit is up to 3000 euro. I sell the board as pictures below show, with power supply, remote, manual is 1000 euro shipping excluded.
The board's owner is a friend of mine. He had a bad Lumagen videoprocessor of previous series. He asked to dealer for repair but was offered only the main board of the next series. So he have only the main board with power supply and remote control. However if you do not need analog features this board can be a real bargain. If you are interested you can make a private offering. He can add a empty chassis from previous series processor. You can adapt with DIY modifies.
Post by stridsvognen on Apr 6, 2017 10:00:15 GMT -5
I already have a XS+ so there the only reason to buy a 2144 should be to get the analog input, specially its 3D comb filter for laserdisc.
And building a many money mockup of parts wont have a resale value, so ill hang around and see if there will be a complete 2144, or wait a bit longer and see if the Pro will be fully up to speed with all the HDMI standards in a few years, so i have a 4K input/ output capable processor, all the 1080P stuff is getting obsolete these days.
zjjxhzf: hello Gabor i am DLP projectorColor wheel is not accurate，setup memory， the phase angle cant setting for the color wheel ，must use service code.
Sept 19, 2017 1:31:25 GMT -5
mastertech: Hi stranger. Guess you spent your summer cruising on that street bike.
Sept 17, 2017 21:43:54 GMT -5
nashou: Hey everyone, just saying hi ! Hvent been here for a while hope you're all doing well !!
Sept 17, 2017 19:19:25 GMT -5
mastertech: Parts for repair are no longer available.
Sept 11, 2017 19:42:24 GMT -5
mayavi: my pioneer elite VSX-92TXH it freezes until I unplug and then it won't power on until maybe 10 minutes. came to know that its a common problem in this model. any help would be much appreciated......
Sept 11, 2017 13:39:10 GMT -5
jaredjaric: Thanks so much Hulio :), your expertise is very much respected
Aug 20, 2017 9:25:37 GMT -5
Admin: james: you need to post in the thread where your problem is being discussed.
Aug 9, 2017 19:51:54 GMT -5
james: Yes Sir All wiring was connected.
Aug 9, 2017 7:46:15 GMT -5
Admin: I have uploaded a copy of the SM to the digital projector section.
Jan 10, 2017 20:21:56 GMT -5
ducki: sorrry for my bad english ....(google translate
Jan 10, 2017 17:44:21 GMT -5
ducki: I have the same defect as a cp-x4021n you but can not start it ... I did the same trials with ic202 pc102 and still do not like, I make short pin 1 and 2 of the pc102 and PJ light (orange) goes off ... you can help me with a service manual for this PJ? TNX
Jan 10, 2017 17:43:46 GMT -5
jlb12: pwr switch off = 2(0.0) 3(11.7) 6(.04) 7(.04)
Dec 13, 2016 23:27:03 GMT -5
jlb12: No Problem. Thank you for all your help.
Dec 13, 2016 0:20:40 GMT -5