|
WTB
Jun 5, 2017 1:03:11 GMT -5
via mobile
Post by gregstv on Jun 5, 2017 1:03:11 GMT -5
I need the pre-amp board that plugs into the board with the VPA's on it. Thanks, Greg.
|
|
|
WTB
Jun 4, 2017 23:38:00 GMT -5
via mobile
Post by gregstv on Jun 4, 2017 23:38:00 GMT -5
Does anyone have a green neck board assembly for a 1292? I really only need the CAG board. Thanks, Greg.
|
|
|
Post by gregstv on May 30, 2017 4:32:06 GMT -5
How much are on the tubes?
|
|
|
Post by gregstv on May 29, 2017 23:32:30 GMT -5
Haven't seen any EM focusing rear projection TV's here in Australia
|
|
|
Post by gregstv on May 29, 2017 15:42:45 GMT -5
Did they make em focus rear pro,s?
|
|
|
Post by gregstv on May 29, 2017 15:09:13 GMT -5
From what I can find out about the p16ljm tube is they are for rear projection TV,'s. They may only be em focus and have short necks.
|
|
|
Post by gregstv on May 29, 2017 6:21:09 GMT -5
If Ratty doesn't take them let me know. Maybe worth playing with at some stage. I up the road in Canberra.
|
|
|
Post by gregstv on May 20, 2017 18:10:29 GMT -5
Just purchased another memory board. Hopefully all good. I will look into getting chips programmed and repair the old board as well
|
|
|
Post by gregstv on May 19, 2017 16:54:32 GMT -5
Looks like the ROM is corrupted. Anyone have a programmer for 27HC641. Looks like I can still get chips. $94 each. Some have modded the 27c64 to work that are much cheaper. Iam still hoping to pick up a memory board. One on eBay in the US but they won't ship outside the US.
|
|
|
Post by gregstv on May 14, 2017 2:24:39 GMT -5
It had a faulty power supply. I repaired it and now all voltages are in spec. I have no control of anything on the front panel and all lights are on. Only noise on screen, no characters. Processor board has ROM17 light on. I think the processor or memory board has failed.
|
|
|
Post by gregstv on May 14, 2017 1:00:28 GMT -5
Hi Guys, Does anyone know anything about Tektronics spectrum Analyzer. I have a 492/6 that has a strange problem.
|
|
|
HDFURY 4s
May 7, 2017 6:05:21 GMT -5
via mobile
Post by gregstv on May 7, 2017 6:05:21 GMT -5
So it has to have an input signal first. I will give that a go.
|
|
|
Post by gregstv on May 7, 2017 3:16:02 GMT -5
I get a message that it didn't find the handle. Then it tells me to plug it into the USB port and then it will open the GUI once I hit enter. Just cant apply what I change in the GUI. Is there a way of knowing if it connects to the GUI?
|
|
|
HDFURY 4s
May 7, 2017 0:08:03 GMT -5
via mobile
Post by gregstv on May 7, 2017 0:08:03 GMT -5
I have set it up on the 1292. Looks better than the moome v3 external. So I decided to play and it worked out really nice on the Sony. Chain is, Samsung blu-ray player to DVDO 1080p@24, DVDO to HDFURY 1080p@24, HDFURY to Sony 1080p@72. I used the DVDO to adjust the porch settings and move the picture.
|
|
|
HDFURY 4s
May 6, 2017 19:16:38 GMT -5
via mobile
Post by gregstv on May 6, 2017 19:16:38 GMT -5
How is the USB port on a computer going to supply enough power to fire up the Fury so adjustments. The power supply is rated a 2amps. Even if it only needs 1amp a computer is going to struggle big time. Art not computer USB ports rated at 500ma?
|
|