|
Post by americaotech on Jan 23, 2014 15:51:10 GMT -5
no problem. it is a problem with them tightening the security within java. to fix this click your start button type java open configure java. under the general tab click view temporary internet files and delete all cookies there (old labels you printed prompts). Next you will want to go to the security tab and lower the security level to medium and click restore security prompts, then click restore all. then simply close and restart you computer. and viola! no more label printing issues.
|
|
|
Post by americaotech on Jan 23, 2014 14:35:23 GMT -5
actually ive repaired the issue already. sorry to inconvenience you.
|
|
|
Post by americaotech on Jan 23, 2014 14:01:11 GMT -5
ok this kinda sucks to ask because this is my area of expertise but im extremely short on time. so here we go. my boss says he upgraded his java and now he cant print shipping labels from ebay.com or fedex.com . the buttons for print and select target printer do nothing that refresh the page. on rare occasions it bring up a security prompt askin if you will allow java to run which of coarse we do click run. ive already tried uninstalling the most recent update (java update 51) to its last version which was working fine (java update 45) but im still having the same issue.
|
|
|
Post by americaotech on Jan 23, 2014 11:03:58 GMT -5
ok perfect i think boss man is getting it ready now
|
|
|
Post by americaotech on Jan 23, 2014 10:37:21 GMT -5
so if we wanted you to look at it should i just send the board.
|
|
|
Post by americaotech on Jan 22, 2014 10:32:01 GMT -5
thanks a lot guys this helps a bunch.
|
|
|
Post by americaotech on Jan 21, 2014 11:33:30 GMT -5
any ideas? it goes into protect mode a few seconds after being powered on.
|
|
|
Post by americaotech on Jan 14, 2014 10:35:54 GMT -5
i have a General electric GE2524 it is set to dc voltage but its very basic so you have to set the test range.
|
|
|
Post by americaotech on Jan 13, 2014 17:19:07 GMT -5
i set my dmm to 2000m and pins 1-7 showed 1mv. pin 8 which is cut showed no voltage from the cp11 end. when the dmm is set to 20 i get no reading which is why i dropped it to the lower setting. but when i tested the othe side of the pin 8 wire (leading from the main board) i get a reading of 0v and when set on the higher setting i get a reading of 0 volts. hopefully i described it better this time. but the pin 8 wire seems to be the only one giving an abnormal reading.
|
|
|
Post by americaotech on Jan 13, 2014 13:43:38 GMT -5
everything is connected properly except for pin 8 on cp11.
|
|
|
Post by americaotech on Jan 13, 2014 10:04:19 GMT -5
ok back again. the unit does stay powered on with pin 8 snipped. what is the next step master? *bows respectfully*
|
|
|
Post by americaotech on Jan 8, 2014 13:32:06 GMT -5
just the boards for the inputs i had to remove them to get to cp11
|
|
|
Post by americaotech on Jan 8, 2014 11:46:21 GMT -5
ok i unhooked the hdmi and analogue boards unhooked cp 11 then attempted a power on it now cuts off immediately but now theres a red led flashing in the front on the ipod iphone setting. so im guessing thats the system telling me where the problem is? or is that too easy of an assumption? anyway thanks alot for the help with out your help im not sure i woulda tried any of these things myself.
|
|
|
Post by americaotech on Jan 7, 2014 13:25:28 GMT -5
sorry for disappearing been tied up with a few other projects. i located cp11 located pin 8 which indeed was labeled o/l-det snipped the wire, hooked the boards i removed to get to it back up, and hit the power..... and still doing the same thing . what should i try next? and should i fix the wire first?
|
|
|
Post by americaotech on Dec 10, 2013 13:24:46 GMT -5
hello I am a technician for an online reseller. i am new to fixing advanced electronics, most fixes I've ever done involved swaping parts but i am looking to take my knowledge further. anyway my point being i have a pioneer VSX-1020-k receiver when plugged i hear clicking which i assume is either fuses or capacitors operating normally but when powered on it starts up normally for about 4 seconds then shuts off and a red led starts flashing under something labeled PQLS. could anyone possibly guide in the direction of the problem and possible solutions?
|
|