ONKYO TX-NR1010 no sound DSP2 WRITING 98% error 1-40

dsash800
New Member

Posts: 3

ONKYO TX-NR1010 no sound DSP2 WRITING 98% error 1-40 Feb 23, 2024 10:38:41 GMT -5

Quote

Post by dsash800 on Feb 23, 2024 10:38:41 GMT -5

Hello.

At first I apologize for my English language but I write with a translator.

I have a problem with ONKYO TX-NR1010. DSP2 error firmware

I tried to upload the software over USB and everything is loading but not DSP2. DSP2 WRITING 98% displayed ERROR 1-40 UPDATE on the display during loading.
I need DSP2 dump file to reprogram Q3401
Plese help.

xXFREDBERTXx Junior Member Posts: 97	ONKYO TX-NR1010 no sound DSP2 WRITING 98% error 1-40 Feb 23, 2024 15:37:47 GMT -5 via mobile Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by xXFREDBERTXx on Feb 23, 2024 15:37:47 GMT -5 Hello dsash800, we’re are you from maybe I could help you out 🤓 Regards

dsash800 New Member Posts: 3	ONKYO TX-NR1010 no sound DSP2 WRITING 98% error 1-40 Feb 23, 2024 16:30:20 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by dsash800 on Feb 23, 2024 16:30:20 GMT -5 Feb 23, 2024 15:37:47 GMT -5 xXFREDBERTXx said: Hello dsash800, we’re are you from maybe I could help you out 🤓 Regards I live in the Ukrain

xXFREDBERTXx Junior Member Posts: 97	ONKYO TX-NR1010 no sound DSP2 WRITING 98% error 1-40 Feb 24, 2024 8:52:17 GMT -5 via mobile Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by xXFREDBERTXx on Feb 24, 2024 8:52:17 GMT -5 Ok but that’s to far away sadly from Germany 🧐 Which DSP have you on that Board D830K013…. because I think these is now the issue and not allow you to update DSP2 😙
	Last Edit: Feb 24, 2024 8:52:36 GMT -5 by xXFREDBERTXx

dsash800
New Member

Posts: 3

ONKYO TX-NR1010 no sound DSP2 WRITING 98% error 1-40 Feb 25, 2024 1:22:56 GMT -5

Quote

Post by dsash800 on Feb 25, 2024 1:22:56 GMT -5

I also thought that the problem was in DSP1, I changed the chip twice D830K013DZKB4, the same result. On the RESET leg of the DSP2, a chip reset signal comes every second. It’s like there’s a broken firmware in the DSP2 chip

Last Edit: Feb 25, 2024 1:25:02 GMT -5 by dsash800

xXFREDBERTXx Junior Member Posts: 97	ONKYO TX-NR1010 no sound DSP2 WRITING 98% error 1-40 Feb 28, 2024 13:00:09 GMT -5 via mobile Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by xXFREDBERTXx on Feb 28, 2024 13:00:09 GMT -5 Thanks Admin for delete now two times my post I precious that a lot 🤝
	Last Edit: Feb 28, 2024 15:46:57 GMT -5 by Admin

Admin
Administrator

Please Tell All About This Site.

Posts: 331

ONKYO TX-NR1010 no sound DSP2 WRITING 98% error 1-40 Feb 28, 2024 18:53:35 GMT -5

Quote

Post by Admin on Feb 28, 2024 18:53:35 GMT -5

Feb 28, 2024 13:00:09 GMT -5 xXFREDBERTXx said:

Thanks Admin for delete now two times my post I precious that a lot 🤝

You are more then welcome to post any positive help you have for forum members.

Welcome to our forum! Please tell all your friends, relatives and neighbors about this great site.

I hope for it to be everyone's one stop place for repair help and information.

repairalmostanything.com

retiredhvac: Onkyo TX-SR353 Service Manual Request. Tried to contact forum member who offered it but no reply. This unit may share identical traits with a Pioneer.

Sept 16, 2023 16:02:07 GMT -5 *

mastertech: Not finding much. Maybe get the part numbers off those 2 devices mounted on the heatsink near that resistor. Sept 15, 2023 21:03:01 GMT -5

dirty666: I have a boston Sounware XS Digital Cinema 2012.02.10 and one resistor is defekt/burned.I need a chematic....can you help me Sept 10, 2023 6:49:26 GMT -5

Repair Almost Anything

ONKYO TX-NR1010 no sound DSP2 WRITING 98% error 1-40

Post by dsash800 on Feb 23, 2024 10:38:41 GMT -5

Post by xXFREDBERTXx on Feb 23, 2024 15:37:47 GMT -5

Post by dsash800 on Feb 23, 2024 16:30:20 GMT -5

Post by xXFREDBERTXx on Feb 24, 2024 8:52:17 GMT -5

Post by dsash800 on Feb 25, 2024 1:22:56 GMT -5

Post by xXFREDBERTXx on Feb 28, 2024 13:00:09 GMT -5

Post by Admin on Feb 28, 2024 18:53:35 GMT -5

Shoutbox