Post by Decibel on Dec 23, 2015 12:06:59 GMT -5
I'm finally starting to calibrate the projector. I can not have a uniform focus on the screen. I'm sure I did perfectly static and dynamic astigmatism.
Despite this, I can not have the focus in the edges of the screen in particular the upper and lower right corners.
It is not an optical or scheimpflug problem because the grids are not perfect on the surface of the tubes.
The problem is especially on the green.
I remind everyone that I'm using a spare controller with a Reality 909 software.
I noticed that the 909's focus menu is different from cine 9 or Cinemax. The Reality does not have the control of left and right sides.
Any suggestions?
Despite this, I can not have the focus in the edges of the screen in particular the upper and lower right corners.
It is not an optical or scheimpflug problem because the grids are not perfect on the surface of the tubes.
The problem is especially on the green.
I remind everyone that I'm using a spare controller with a Reality 909 software.
I noticed that the 909's focus menu is different from cine 9 or Cinemax. The Reality does not have the control of left and right sides.
Any suggestions?
