Post by Casethecorvetteman on Dec 28, 2015 0:04:00 GMT -5
Hi all 
Ive got a fair few different devices that i connect up with a SCART connector for RGB-S, but the problem is each one has a different plug at one end, so i have at least 6 different SCART leads here.
At present, they run into a board with a SCART socket input to 5x BNC + DB15 outputs, and from there into an XRGB3 scaler for the line doubling, and out via RGB-HV to the Barco.
It all works really well. However, i have to swap SCART leads a lot, itd be really handy if i could just move a switch or press a button!
Dont want anything cheap that will degrade my signal though!!
Thanks in advance
Ive got a fair few different devices that i connect up with a SCART connector for RGB-S, but the problem is each one has a different plug at one end, so i have at least 6 different SCART leads here.
At present, they run into a board with a SCART socket input to 5x BNC + DB15 outputs, and from there into an XRGB3 scaler for the line doubling, and out via RGB-HV to the Barco.
It all works really well. However, i have to swap SCART leads a lot, itd be really handy if i could just move a switch or press a button!
Dont want anything cheap that will degrade my signal though!!
Thanks in advance
