Post by gregstv on Jun 18, 2017 2:11:57 GMT -5
Hi Drag,
Did you get the chip fitted? If not you can send me the board and chip and I will get it fitted. We have a full rework machine at work to do these types of chips.
You can do them with hot air and solder paste. Put paste under the chip on the big ground pad and slowly heat the chip and also heat the board from underneath.once it has flowed you will see the chip drop down as the solder pulls it once re-flow temp has been reached. Use led based paste as it has a lower re-flow temp. Then solder the pin by hand.
Did you get the chip fitted? If not you can send me the board and chip and I will get it fitted. We have a full rework machine at work to do these types of chips.
You can do them with hot air and solder paste. Put paste under the chip on the big ground pad and slowly heat the chip and also heat the board from underneath.once it has flowed you will see the chip drop down as the solder pulls it once re-flow temp has been reached. Use led based paste as it has a lower re-flow temp. Then solder the pin by hand.
