Post by nashou on Aug 31, 2016 13:00:11 GMT -5
I have had this GTP-506 with 3 zone capability that I wanted to use at my restaurant. Well I finally installed it with a GFA 5006 6 channel amp.
The issue i am having is that zone 2 and 3 volume can only be adjusted via a remote control( I have) but from an IR receiver connected tot he back
of the preamp. I bought two IR receivers one for that can be used on a verizon Fios STB from Infrared Resources and the other is from MCM Electronics Stallar labs www.mcmelectronics.com/content/ProductData/Manuals/50-14877.pdf
Here is the Adcom User manual. I dont have a Service manual which might have more info.
www.adcom-usa.com/userguides/gTP-506-ug.pdf
Not sure if the adcom IR port ( 3.5mm ) is working or not or if the units I tried to use are not the right plug type wiring wise.
Is there something I missed?
Nashou
The issue i am having is that zone 2 and 3 volume can only be adjusted via a remote control( I have) but from an IR receiver connected tot he back
of the preamp. I bought two IR receivers one for that can be used on a verizon Fios STB from Infrared Resources and the other is from MCM Electronics Stallar labs www.mcmelectronics.com/content/ProductData/Manuals/50-14877.pdf
Here is the Adcom User manual. I dont have a Service manual which might have more info.
www.adcom-usa.com/userguides/gTP-506-ug.pdf
Not sure if the adcom IR port ( 3.5mm ) is working or not or if the units I tried to use are not the right plug type wiring wise.
Is there something I missed?
Nashou
