|
|
Post by timinphoenix on Dec 9, 2017 12:15:28 GMT -5
Guys
Removed what looked like all applicable screws and the table stand, but rear cover is stuck. What's the secret? Need to remove stuck wall mounts.
|
|
|
|
Post by mastertech on Dec 9, 2017 15:31:00 GMT -5
Hi Tim. There are probably plastic locking tabs around the perimeter besides the screws. If you are sure all the screws are out then you push in on the plastic cover near the seam while pulling slightly. Sometimes a screwdriver helps but also marks the seam edge. But that can be smoothed back out by scraping with a knife. Once you get part of the cover released the rest becomes easier to come apart.
|
|
|
|
Post by timinphoenix on Dec 9, 2017 17:22:50 GMT -5
Okay
I'll have to get back into it, later in the week Thanks
|
|
