|
|
Post by tokejo on Feb 17, 2014 21:06:24 GMT -5
Unit turns on, and stays on.
I get no audio through HDMI, Tuner or analog inputs
I get no video through HDMI.
This one has a cracked front panel so I would be just fine with using it as a donor machine, but might as well give it a shot.
|
|
|
|
Post by mastertech on Feb 17, 2014 21:26:24 GMT -5
Do you think the board inside that front panel was damaged?
|
|
|
|
Post by Tokejo1 on Feb 17, 2014 21:40:24 GMT -5
Everything looks to be ok inside but I could be wrong.
|
|
|
|
Post by mastertech on Feb 17, 2014 21:44:00 GMT -5
Are the speakers turn on, lol? This one has a speaker on/off button.
|
|
|
|
Post by tokejo on Feb 17, 2014 22:46:33 GMT -5
 I don't see a speaker on/off button on this one. |
|
|
|
Post by tokejo on Feb 17, 2014 22:49:22 GMT -5
The picture is the 1713 but the 1613 looks the same. I don't see any speaker icons on my display either.
|
|
|
|
Post by mastertech on Feb 18, 2014 10:19:20 GMT -5
Oh duh, I was looking at the 1022 manual. You guys have me all confused going back and forth, lol. Let me look to see what is next.
|
|
|
|
Post by mastertech on Feb 18, 2014 12:09:07 GMT -5
 Try doing a reset: |
|
|
|
Post by tokejo on Feb 18, 2014 12:46:54 GMT -5
Still no audio/video.
|
|
|
|
Post by mastertech on Feb 18, 2014 12:59:21 GMT -5
With HDMI out connected to the TV and nothing else, will it display the menu onscreen?
|
|
|
|
Post by mastertech on Feb 18, 2014 13:00:04 GMT -5
Did it confirm the reset? |
|
|
|
Post by tokejo on Feb 18, 2014 13:24:46 GMT -5
It flashed the whole display, like a solid stripe in the center with all the icons at once for the time I held in the Source Select buttons.
I'll program another remote and see if I can pull up the menu tonight.
|
|
|
|
Post by tokejo on Feb 18, 2014 18:29:49 GMT -5
Swapped the HDMI board from the other unit into this one. I get audio through analog inputs, FM tuner and HDMI but no HDMI video.
Swapping the original board back in and I get no audio/video as before.
|
|
|
|
Post by mastertech on Feb 18, 2014 18:54:17 GMT -5
Were you able to program a remote yet to get into the menu?
|
|
|
|
Post by tokejo on Feb 18, 2014 19:45:56 GMT -5
Not yet, was getting the values for the other one first.
|
|
