CRT appears to have gone to the way side some time ago. The few that are left seem to talk in private more then in the open, probably because of a lot of the ridicule. In a way you can't blame them when other forums did very little to prevent the abuse in the first place. That was actually part of the reason this forum was created but it was most likely already to late as so much damage was done. CRT ridicule is not allowed here.
Welcome to our forum! Please tell all your friends, relatives and neighbors about this great site.
I hope for it to be everyone's one stop place for repair help and information.
Post by stridsvognen on Aug 6, 2020 15:09:34 GMT -5
I just fired up the Marquee for first time in months, still need to change the blue tube, no idea when ill get to it, there is nothing to talk about, as Admin mentions to much shit has been going on in various forums, so we keep it to ourselves in private groups with likemindet or friends and thats it. Ill estimate that the last CRT projector is turned completely off within the next 5-10 years.
wildone: I don't think the B chip is at fault. The lead-free manufacturing process and solder balls used are more likely the culprit as the BGA still works after reballing
Feb 26, 2021 8:06:43 GMT -5
trloki: Hi Todd, Same problem Onkyo TX-NR646, any help on how to fix it plz?
Feb 25, 2021 1:35:18 GMT -5
btrial: poppabradj I have the same problem with Pioneer VSX-1131, after uprating firmware through NET. Now I cannot access neither NET nor Bluetooth, and also updating through USB doesn't work giving 0-81 error. If you have found any fix let me know.
Feb 7, 2021 15:37:42 GMT -5
poppabradj: Hello Everyone, I have a Onkyo TX-NR656 Can model and it's giving me error 0-81 when I try to update from a USB... I think i have corrupt firmware, becasue I had no access to NET, Bluetooth feature. The On screen display never Error 0-81 now.. please Help
Jan 7, 2021 21:33:29 GMT -5
gjaky: Hi Craig, Why do you need it? I mean with multi channel amplifiers all channels are the same, it is usualy possible to find at least one working channel so you can identify (or at least guess) component values for repair
Nov 16, 2020 2:53:07 GMT -5
craigr: Actually, I have been unable to find schematics or a service manual for the Lexicon LX-7 or LX-5 amps. Of anyone has a copy I would highly apreciate it.
Oct 31, 2020 15:28:59 GMT -5
analogrocks: Those are pretty pictures! Set one up running a ps1 or NES and sell them as retro gaming projectors. OR post them to me. Just put the stamps in the corner. Should make it just fine
Aug 28, 2020 16:28:01 GMT -5
iwwy1969: Hi all. Nice forum. I have Onkyo TX-NR616 no sound and no usb access. I have 5v at usb. I found that oscillator close to DSP is not working. It has no voltage feed from DSP. During the testing through display DSP shows version D??? .
Jul 13, 2020 8:25:33 GMT -5
lfcfan: Hi Todd, have been reading endlessly about the topic, and I really don't think that I'll be capable to 1. do the job myself as I don't have enough of the right equipment, and it looks like only the people who have access to TI exclusive distribution networ
Apr 9, 2020 17:17:06 GMT -5
skydronelink: Thank you I advance
Jan 29, 2020 4:01:41 GMT -5
skydronelink: Hi Repairaj, I have the same issue, but I am not able to get the cap value, I can tell it is the same board but deffirent rev cause of the side CAP is not the same value ! any idea how I can get the right burnt cap value?
Jan 29, 2020 4:01:31 GMT -5
skydronelink: Hello Jerme, thank you for the those images, is there is any chance to get the C2 (Cap) value or an image for it ? Thank you in advance.
Jan 27, 2020 23:15:06 GMT -5
skydronelink: Hello Sergio, I have the same issue, but I am not able to get the cap value, did find out what is the cap value?
Jan 26, 2020 18:01:17 GMT -5