|
|
Post by cobba1231 on Dec 12, 2022 11:40:33 GMT -5
Hi guys. The problem with the receiver is as follows: - there is no sound output to the speakers. There is sound when PURE DIRECT is pressed. Diagnosis( info+tone+main zone) showed that no checksum and version DSP1 . DSP2 - OK. What could be? Chipboard DSP1 supply voltage is normal. Need a chipboard DSP1 replacement?    disk.yandex.ru/i/p-YISDx-Fr39Og Service manual |
|
|
|
Post by cobba1231 on Dec 13, 2022 5:06:59 GMT -5
Hi . Heating the chip did nothing.
Made it similar to this video.
|
|
|
|
Post by tibimakai on Dec 16, 2022 10:58:39 GMT -5
Usually the BGA ICs have the solder ball issues.
|
|
|
|
Post by geduxaz on Jan 13, 2023 15:06:49 GMT -5
cant you see serial output to check if system is booting? maybe it cant boot because of FW issue?
|
|
nodols
Junior Member
Posts: 75
|
Post by nodols on Jan 14, 2023 14:23:39 GMT -5
cant you see serial output to check if system is booting? maybe it cant boot because of FW issue? Hi, what program do you usually use to get a readout from serial port or LAN port? |
|
|
|
Post by geduxaz on Jan 15, 2023 4:26:27 GMT -5
cant you see serial output to check if system is booting? maybe it cant boot because of FW issue? Hi, what program do you usually use to get a readout from serial port or LAN port? serial port output to any console like Putty or TerraTerm. |
|
nodols
Junior Member
Posts: 75
|
Post by nodols on Jan 18, 2023 12:29:04 GMT -5
Hi, what program do you usually use to get a readout from serial port or LAN port? serial port output to any console like Putty or TerraTerm. Thanks. Will try researching on those. |
|
