haireez
Unmoderated Off Topic
Posts: 68
|
Post by haireez on May 14, 2016 2:39:54 GMT -5
For my current Vision 1 setup, can I install VNB P/N:81771-02 on my green P43 fast phosper tube and use VNB P/N: 2-270340-01B on the red and blue LCP tubes? If yes, I would like to try to install them on my Vision 1 tonight.
|
|
haireez
Unmoderated Off Topic
Posts: 68
|
Post by haireez on May 14, 2016 2:38:54 GMT -5
For my current Vision 1 setup, can I install VNB P/N:81771-02 on my green P43 fast phosper tube and use VNB P/N: 2-270340-01B on the red and blue LCP tubes?
|
|
haireez
Unmoderated Off Topic
Posts: 68
|
Post by haireez on May 11, 2016 8:43:57 GMT -5
Hi All,
Before I start to install them on my Vision 1, I need to be absolutely sure before I damaged any tube. My current set-up right now is that my red & blue tubes are LCP and I believe I can use the 2 VNB (P/N: 2-270340-01B) that has the jumper setting to 'B' and connect the G2 wire as per LCP configuration.
My green tube right now is P43 fast phospher tube (more for 3D movie with HD Fury4) and the configuration is the same as lug. Does this mean that I can use the VNB with jumper setting at 'A'.
I'm just concern when Barclay mentioned that P/N:81771-02 doesn't work with different type. If this cannot be mixed, can I used my old style VNB that has been modified for P43 tube & used P/N: 2-270340-01B for red & blue tube?
|
|
haireez
Unmoderated Off Topic
Posts: 68
|
Post by haireez on May 8, 2016 8:06:46 GMT -5
Thanks for the clarifications. Does it mean that if I were to change all to 'A' setting, I can immediately use lug tube or if I were to change all to 'B'setting, I can use them for LCP tubes without the need to further modified anything vice versa?
|
|
haireez
Unmoderated Off Topic
Posts: 68
|
Post by haireez on May 8, 2016 5:41:26 GMT -5
I think I found which one you're referring to. On the otherside, the first one is set to 'B' and the other one is set to 'A'. What does it means?
|
|
haireez
Unmoderated Off Topic
Posts: 68
|
Post by haireez on May 8, 2016 5:31:16 GMT -5
Hi, I'm not too sure where is the jumper that you're referring to. If you're referring to R64, then both setting are exactly at the same direction but if it is not, do let me know where and I will check again.
|
|
haireez
Unmoderated Off Topic
Posts: 68
|
Post by haireez on May 8, 2016 1:20:11 GMT -5
That's why I'm surprise seeing this VNB from Curt and hopefully someone from this forum could advise whether they are really for Lug tube and safe to use.
|
|
haireez
Unmoderated Off Topic
Posts: 68
|
Post by haireez on May 6, 2016 6:30:37 GMT -5
Hi, Just to confirm on 2 types of VNB that I just received from curt. Presumably for lug tubes as I was told by Curt. However, I'm surprise that 2 of them are identical (P/N: 2-270340-01B) while the 3rd VNB (P/N: 81771-02H). Can anyone advise why one of the VNB different? The 3rd VNB has 2 G2 pin that I've never seen before. Appreciate if anyone know exactly which is the correct lug tube VNB.
|
|