|
|
Post by hulio on Jul 19, 2015 18:06:45 GMT -5
Versions 2.13, 2.21 and 2.22 are in the download section indeed.
As far as i know, it is not possible to save the existing software from the controller in bin. file format. You'll need a more sophisticated program for that. Myself, i would like to have BR909 V3.20 too.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 19, 2015 18:25:36 GMT -5
I currently have 2.13 and it is good to see that Imcan allways go back to that version. I want to try my controller in a seos split pack but might need a seos software version for that. I am going to try first but is there any experience with cin 9 controllers in seos machines?
|
|
|
|
Post by hulio on Jul 19, 2015 18:43:54 GMT -5
The split-pack will run with the Cine 9 soft but you could get a fan fail error. The max. scan frequency will be a bit limited too. You can safely try, you'll not damage anything.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 19, 2015 23:12:47 GMT -5
The split-pack will run with the Cine 9 soft but you could get a fan fail error. The max. scan frequency will be a bit limited too. You can safely try, you'll not damage anything. Have you tried this? And the fans might they spin to slow even when I do not use the fanboard? Is there something in the cine 9 software regulating the fanspeed even without th fanboard? |
|
|
|
Post by hulio on Jul 20, 2015 0:38:52 GMT -5
|
|
|
|
Post by Casethecorvetteman on Jul 20, 2015 3:58:40 GMT -5
After flashing Cine 9 software onto my 909 SkySkan controller it did indeed slow the fans, no fan errors.
The software dictates the errors. There were none even with the fan boards missing, the CineMAX only has the front tray fan board anyway, there is no extra board in the rear.
The SEOS parts of the software will not change, if my SkySkan is anything to go by, and im sure someone else did a SEOS as well.
The lowering of the max scanrate is really neither here nor there. Who is ever going to push it to 180kHz anyway? Its far more than you need or could effectively use.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 20, 2015 4:31:00 GMT -5
Ok I guess the fans spinning slower might not be a good thing in the splitcase housing. On the other hand there is less to cool because the tubes have their own fans so a little slow down might even hurt less in a split? What do you think?
|
|
|
|
Post by Casethecorvetteman on Jul 20, 2015 21:14:05 GMT -5
Cant see an issue. They speed up when it gets hot.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 21, 2015 11:32:52 GMT -5
Cant see an issue. They speed up when it gets hot. Good point! |
|
|
|
Post by Decibel on Aug 14, 2015 2:56:48 GMT -5
As I said in another topic, yesterday arrived a controller that I bought.
The identification screen show "BR 909" with more over 53k hours.
Software 2.22.
The run time of each tube show little hours, about 16.
How is possible?
|
|
|
|
Post by hulio on Aug 14, 2015 3:28:24 GMT -5
That's normal. Unlike other Barco projectors, BR909/Cine9//Max have the option to reset the counter for each tube.
So it means that the previous owner changed his tubes, reset the counter and used the projector just for 16 hours eversince.
Congrats with bringing the Max back to life. Now you have also back-up for most critical boards.
|
|
|
|
Post by Decibel on Aug 14, 2015 5:34:35 GMT -5
That's normal. Unlike other Barco projectors, BR909/Cine9//Max have the option to reset the counter for each tube. So it means that the previous owner changed his tubes, reset the counter and used the projector just for 16 hours eversince. Congrats with bringing the Max back to life. Now you have also back-up for most critical boards. Thank you Hulio. However my Cinemax isn't ready to work. There are still little issues that I must fix. |
|
|
|
Post by Decibel on Aug 25, 2015 13:31:53 GMT -5
A simple question: as I said in another thread, I bought a controller with BR909 software.
Can I put this controller in my Cinemax?
I tried to install it and apparently there aren't problems.
|
|
|
|
Post by hulio on Aug 25, 2015 14:37:13 GMT -5
Sure you can, they are interchangeable. In fact is one and the same board with little software mod. ( limitation of upper scan frequency for CineMax in order to be able to run the fans a bit slower ).
|
|
|
|
Post by Decibel on Aug 25, 2015 20:56:22 GMT -5
So if I swap the controller into my Cinemax I will have a BR909 without scan limitations?
|
|
