|
|
Post by fuxtor on May 16, 2016 22:13:24 GMT -5
I got the display board disconnected finally. I can/ will be plugging connectors back in for testing!!
|
|
|
|
Post by fuxtor on May 22, 2016 13:27:59 GMT -5
I'm assuming for testing the display board I should be regrounding the black wires ?? I also have the board connected and free from both sides.
|
|
|
|
Post by mastertech on May 23, 2016 8:45:38 GMT -5
Yes. Let me know when you are ready.
|
|
|
|
Post by fuxtor on May 23, 2016 16:18:41 GMT -5
Just to check, I shouldn't need all the boards back in the unit such as component video and preout jacks etc ??
|
|
|
|
Post by mastertech on May 23, 2016 19:48:52 GMT -5
It depends if the unit will stay turned on or not. Many will not stay on without all boards. You need it to stay on for testing. Or you have to jump the main power relay to force power through the unit for testing.
|
|
|
|
Post by fuxtor on May 23, 2016 20:28:17 GMT -5
OK.i will reinstall the boards that it requires and we can continue.
|
|
|
|
Post by mastertech on May 26, 2016 21:44:18 GMT -5
I dont know if you are ready or waiting for me but you need to let me know if you are ready.
|
|
|
|
Post by fuxtor on May 27, 2016 17:05:47 GMT -5
I got everything ready, but I'm not getting the initial relay click as before.... trying to go over everything
|
|
|
|
Post by fuxtor on May 27, 2016 21:25:48 GMT -5
OK, I got no relay , but the display is connected and has standby light....
|
|
|
|
Post by fuxtor on May 27, 2016 21:28:56 GMT -5
Should I have put the preout jumpers back in possibly??
|
|
|
|
Post by mastertech on May 28, 2016 10:01:19 GMT -5
Should I have put the preout jumpers back in possibly?? No, this should not matter. If the relay is not latching on with the button press then you are going to have to jump the main power relay to do further testing. |
|
|
|
Post by fuxtor on May 28, 2016 11:23:20 GMT -5
Yes, OK. Can you tell me how I go about this?
|
|
|
|
Post by mastertech on May 28, 2016 12:38:16 GMT -5
On the power supply board locate C109, see attached image. Solder a wire across the legs of C109. Just remember that now when you plug it in everything has power even without pressing the power button.  |
|
|
|
Post by fuxtor on May 28, 2016 15:41:37 GMT -5
I have a dim bulb tester, think it's a good idea to use in this case??
|
|
|
|
Post by mastertech on May 28, 2016 15:53:55 GMT -5
For what?
|
|
