nashou
Unmoderated Off Topic
Tech in Training.....
Posts: 1,239 
|
Post by nashou on Apr 19, 2017 17:56:56 GMT -5
No, its not there. it jumps around from 1.5 to 2.7 erratically .
Stepping out for a few hours.
|
|
|
|
Post by mastertech on Apr 19, 2017 18:57:01 GMT -5
Looks like the hunt is back on. If that is what you want to do. TV's suck anymore, don't they, lol.
|
|
nashou
Unmoderated Off Topic
Tech in Training.....
Posts: 1,239
|
Post by nashou on Apr 19, 2017 19:42:33 GMT -5
Looks like the hunt is back on. If that is what you want to do. TV's suck anymore, don't they, lol. Oh God, well whats next. ugh. I just bought a Linn Axis Turntable thats dead, might give up on the TV and move onto this.  nashou |
|
|
|
Post by mastertech on Apr 19, 2017 20:51:29 GMT -5
Doesn't matter to me. You let me know.  |
|
nashou
Unmoderated Off Topic
Tech in Training.....
Posts: 1,239
|
Post by nashou on Apr 19, 2017 22:33:53 GMT -5
lets go a little further then I'll call it quits .
|
|
|
|
Post by mastertech on Apr 20, 2017 9:38:30 GMT -5
Well the first thing that comes to mind is that power supply. We know it still has a problem with that transformer and that is the same transformer for the 5v for standby.
So I would removed that PS and set your external PS to +5v and connect it to the main board where the 5v supply should be on pins 11 or 12 for pos and neg on 5,6 or 7 at the PS connector end. Then see if the 5v from your external supply holds or fluctuates also.
|
|
nashou
Unmoderated Off Topic
Tech in Training.....
Posts: 1,239
|
Post by nashou on Apr 30, 2017 19:21:15 GMT -5
Yep it seems to be fluctuating as well with just the 5 volts going to the connector no main power turned on since the 15 volts was removed.
nashou
|
|
|
|
Post by mastertech on May 1, 2017 9:54:07 GMT -5
This is with the tv PS disconnected and running your external supply to the main board only, correct?
|
|
nashou
Unmoderated Off Topic
Tech in Training.....
Posts: 1,239
|
Post by nashou on May 1, 2017 15:30:43 GMT -5
This is with the tv PS disconnected and running your external supply to the main board only, correct? Yes |
|
|
|
Post by mastertech on May 1, 2017 19:40:29 GMT -5
Well you are going to have to start disconnecting things until the voltage stabilizes. This could take some time. Let me know when you want to dedicate some time on this and I will look to see where to start.
|
|
nashou
Unmoderated Off Topic
Tech in Training.....
Posts: 1,239
|
Post by nashou on May 1, 2017 20:41:03 GMT -5
Well you are going to have to start disconnecting things until the voltage stabilizes. This could take some time. Let me know when you want to dedicate some time on this and I will look to see where to start. I assume you mean the Input board parts right? Might be some time till I do. still haven't looked at the Linn TurnTable yet. But i'll get back to this . Nashou |
|
|
|
Post by mastertech on May 1, 2017 21:02:48 GMT -5
Yes, that is the main. Let me know when you are ready.
|
|
