|
|
Post by Casethecorvetteman on Jun 9, 2015 16:59:04 GMT -5
First thing I would do is buy a Moome hdmi card. You are going to need it anyway and there is a chance that the seller (that I know as a trustworthy man) tested it that way so perhaps it is bypassing the malfunctioning electronics. I dont believe there is any malfunctioning electronics in this set ( and this is why i was trying to avoid him "posting parts for testing", because that would be a total waste of money at this point ), i reckon its the missing link between J401 and J402, the MOOME doesnt require that link, it goes into port 3. |
|
|
|
Post by Casethecorvetteman on Jun 9, 2015 17:04:27 GMT -5
He you are right. I made a picture of the switcher in my 809 (cine 8) and that one has part number R7627195 too. It also has the jumper cable. Are you sure about the PFC? I once asked Curt and he said no.  There is almost no question in my mind that connection is required if you want to use port 5 |
|
klo
New Member
Posts: 18 
|
Post by klo on Jun 9, 2015 17:34:55 GMT -5
Hello guys, right back home. Here are some pics of my spare switchers. Part Number R762719 (1208s/2 - donor machine)  daughter board in the back:  |
|
klo
New Member
Posts: 18
|
Post by klo on Jun 9, 2015 17:43:44 GMT -5
The switcher in my 1209s is quite similar, same part number R762719 too.  |
|
|
|
Post by mastertech on Jun 9, 2015 17:48:35 GMT -5
Are you going to try one??
|
|
klo
New Member
Posts: 18
|
Post by klo on Jun 9, 2015 18:11:27 GMT -5
So as i asked in another place, ill ask here to keep it all together, how many groups of yellow wires go from your main board to your neck boards? Mine has two on the Cine, the 909 had 3 each. Although the OSD is injected at the switcher ( is it? ) i doubt that it would go through the complete video path, as in back through the LIMO-PRO or softedge modulator, etc etc... Case, I Have 3 groups of yellow wires going from the main board to the neck boards. You can see them in this pic: 
Id think its unlikely youve got an issue between the mobo and neck boards, 1 maybe, but not 3I agree with You. |
|
klo
New Member
Posts: 18
|
Post by klo on Jun 9, 2015 18:12:36 GMT -5
Are you going to try one?? Is it safe ? |
|
klo
New Member
Posts: 18
|
Post by klo on Jun 9, 2015 18:19:10 GMT -5
In case, I guess I should pull out the daughter board in the back and close j401-j402 with the jumper, right ?
|
|
|
|
Post by mastertech on Jun 9, 2015 18:25:56 GMT -5
No, leave the quad decoder on there for now and don't change anything. The 1208s board looks to be missing a harness so try the 1209s board, just like it is.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 9, 2015 18:33:10 GMT -5
I was unsure to try the 1209s board too at first but checked all power lines untill I was certain I could not blow anything. After that I tried and it worked fine. I also tried the rgb driver of a 808s and that did not work but again I first made sure nothing would blow. The video just had horizontal stripes.
|
|
klo
New Member
Posts: 18
|
Post by klo on Jun 9, 2015 18:35:34 GMT -5
Just to be sure. Do you have this option set off? I do not know if it is possible to set it to on without a line doubler but anyway.  Nope Case, I have no access to this submenu. I have "Color Adjust" and "Format Select" only. I guess I need the LIMO installed to get there. Maybe Barco has a "secret menu" too, like the Marquee... who knows... |
|
klo
New Member
Posts: 18
|
Post by klo on Jun 9, 2015 18:44:48 GMT -5
No, leave the quad decoder on there for now and don't change anything. The 1208s board looks to be missing a harness so try the 1209s board, just like it is. No, the harness is available. I purposely disconnected it pulling out the board in order to avoid damage to the wires. Too many yellow cables in a small space.  |
|
klo
New Member
Posts: 18
|
Post by klo on Jun 9, 2015 18:48:23 GMT -5
RedFox which Switcher are you using ?
R762719 from the 1209s or the original Cine8/9 version ?
|
|
|
|
Post by mastertech on Jun 9, 2015 18:58:45 GMT -5
Just put the 1209s board in a try it. Now you are just wasting time, LOL.  |
|
klo
New Member
Posts: 18
|
Post by klo on Jun 9, 2015 19:27:28 GMT -5
This has a name: Feeeeeear  I'll keep You updated |
|
