|
|
Post by Casethecorvetteman on Jun 9, 2015 19:59:46 GMT -5
Just to be sure. Do you have this option set off? I do not know if it is possible to set it to on without a line doubler but anyway.  Nope Case, I have no access to this submenu. I have "Color Adjust" and "Format Select" only. I guess I need the LIMO installed to get there. Maybe Barco has a "secret menu" too, like the Marquee... who knows... Thats not me, its Redfox  |
|
|
|
Post by Casethecorvetteman on Jun 9, 2015 20:01:12 GMT -5
Also throw in that Port 3 card and try that.
|
|
|
|
Post by Casethecorvetteman on Jun 9, 2015 20:03:40 GMT -5
This has a name: Feeeeeear  I'll keep You updated Have no fear, if you blow it up we will know he was wrong Im yet to see him wrong in 8 years ive known him, if indeed he does make mistakes, he reserves them for something other than electronics! |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 9, 2015 20:27:36 GMT -5
I used the 1209s version. It is still in the Max.
|
|
klo
New Member
Posts: 18 
|
Post by klo on Jun 10, 2015 18:42:47 GMT -5
Did You say... 8 years...  There is always a first time  but not right now   I really, really want to thanks all of You for the great help offered me over this forum. Case, Master, RedFox, Hulio thank You guys ! I really appreciate. The problem is definitely my video board switcher (R7627195-05). Now I have to decide what to do with it: send it out to have it fixed or wait for a spare on the bay. Maybe a spare is going to cost me less. I should also start looking into some additional issues in the mean time. For example: my SMPS squeals, Not much loud but a very high pitch and this is continuous. It doesn't stop turning the pj into "stand by". I have to unpress the power botton to make it shut up.  There is also a subtle Blue tube flickering that makes me think I should start looking for a new quad soon... or maybe its just the blue a bit shorted  Right ? |
|
|
|
Post by mastertech on Jun 10, 2015 19:53:37 GMT -5
The problem is definitely my video board switcher (R7627195-05). Now I have to decide what to do with it: send it out to have it fixed or wait for a spare on the bay. Maybe a spare is going to cost me less. Or fix it your self.  |
|
|
|
Post by Casethecorvetteman on Jun 10, 2015 20:48:51 GMT -5
Did You say... 8 years... There is always a first time but not right now I really, really want to thanks all of You for the great help offered me over this forum. Case, Master, RedFox, Hulio thank You guys ! I really appreciate. The problem is definitely my video board switcher (R7627195-05). Now I have to decide what to do with it: send it out to have it fixed or wait for a spare on the bay. Maybe a spare is going to cost me less. I should also start looking into some additional issues in the mean time. For example: my SMPS squeals, Not much loud but a very high pitch and this is continuous. It doesn't stop turning the pj into "stand by". I have to unpress the power botton to make it shut up. There is also a subtle Blue tube flickering that makes me think I should start looking for a new quad soon... or maybe its just the blue a bit shorted Right ? I reckon the board is fine, you need that connection between J401 and J402. One thing you can do to test the switcher is put in your Port 3 card and try it. DO NOT SEND IT FOR REPAIR TIL YOU TEST IT COMPLETELY!!! i just bought 3 new quads, fixed the waves and flicker i had. Get a spare splitter too! The SMPS in both mine squeal, 1 of them causes a fan fail issue now. Its failing capacitors on that SPMS, Barco has a tech bulletin about it, should be able to find it in the manuals section of this forum |
|
klo
New Member
Posts: 18
|
Post by klo on Jun 10, 2015 20:53:40 GMT -5
Mastertech said: Or fix it your self. Ouch ! Now You are overestimating me. That's beyond even my next incarnation skills... and my ceramic soldering station misses SMD tips However, I guess this splitter suffered from overheat caused by the insertion of the "TV-One" edge blender unit inside the chassis, that may have cahnged the air flow and added additional warm. The heatsink looks very dark brownish around the transistors.
|
|
klo
New Member
Posts: 18
|
Post by klo on Jun 10, 2015 21:08:10 GMT -5
Case,
do You know which models share quads and Splitters with the Max ?
|
|
|
|
Post by mastertech on Jun 10, 2015 21:20:01 GMT -5
I reckon the board is fine, you need that connection between J401 and J402. He did try it with the jumper in place Case. But I think that post never made it to this thread. |
|
|
|
Post by mastertech on Jun 10, 2015 21:21:40 GMT -5
Mastertech said: Or fix it your self. Ouch ! Now You are overestimating me. That's beyond even my next incarnation skills... and my ceramic soldering station misses SMD tips Just start practicing your soldering skills and we can talk you through it. |
|
|
|
Post by Casethecorvetteman on Jun 10, 2015 21:21:49 GMT -5
Oh roger that, i didnt see it anywhere.
Did he test with a Port 3 card??
|
|
|
|
Post by Casethecorvetteman on Jun 10, 2015 21:22:50 GMT -5
Give me a couple minutes, just ordering my lunch.
|
|
|
|
Post by Casethecorvetteman on Jun 10, 2015 21:30:02 GMT -5
Mastertech said: Or fix it your self. Ouch ! Now You are overestimating me. That's beyond even my next incarnation skills... and my ceramic soldering station misses SMD tips However, I guess this splitter suffered from overheat caused by the insertion of the "TV-One" edge blender unit inside the chassis, that may have cahnged the air flow and added additional warm. The heatsink looks very dark brownish around the transistors. Thats pretty normal. |
|
|
|
Post by Casethecorvetteman on Jun 10, 2015 21:31:39 GMT -5
Case, do You know which models share quads and Splitters with the Max ? Im not sure on part numbers mate no, Hulio will know that bit. |
|
Right ?
