Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 17, 2015 9:09:33 GMT -5
Guys I made a mistake. I have v3.12 on my controllers. I read the numbers in mirror sorry. I wonder if there was ever a version higher than 3.12? One other thing. The fans are not so loud with this version. The logo is simple BR909. Also they had a service contract with Barco while the sticcker on the back says made by Barco Seos Prodas. It seems they never have seen Seos.  Sorry for the mistake still figuring out what I bought  |
|
|
|
Post by Casethecorvetteman on Nov 17, 2015 17:48:43 GMT -5
@ Case , you are correct but it's more about the possibility to do it, the reason someone wants 909 software can be non logical. There is no good or logical reason for it. Cine 9 2.21 is not the same as 909 2.21, there were more revisions on the 909, going from 2.21 Cine 9 to 3.12 909 would be a step backwards. Higher number doesnt mean better. |
|
|
|
Post by Casethecorvetteman on Nov 17, 2015 17:49:37 GMT -5
Guys I made a mistake. I have v3.12 on my controllers. I read the numbers in mirror sorry. I wonder if there was ever a version higher than 3.12? One other thing. The fans are not so loud with this version. The logo is simple BR909. Also they had a service contract with Barco while the sticcker on the back says made by Barco Seos Prodas. It seems they never have seen Seos. Sorry for the mistake still figuring out what I bought The logo doesnt change. Itll always say BR909, no matter what version you have. |
|
|
|
Post by Casethecorvetteman on Nov 17, 2015 18:00:03 GMT -5
I have some pretty new controllers (around 500 hours 2009) with V3.20 software. I have not yet seen anything different from my Cinemax 2.13 software. When I tried an older controller with 2.20 it seemed the fans spin at higher speed. So I have the impression the 3.20 software is better than the 2.20 all Seos. I will try to set the 2.20 to 2.21 Cinemax software and hope the fans will spin less fast. For now I will not change the 3.20 software. Oh wait one difference is that there is a zandloper (how you call that hourglass?) often on the screen. There is no SEOS version, its 909 or Cine 9, as in its commercial or domestic. Putting the Cine 9 2.21 software on will add the hourglass where the screen was previously blank. Big deal, at least you can see it doing something and not just a blank screen. I had 3.12 like you have, and the fans are WAYYY faster than any version of Cine 9 software. Hence the reason i told you more than 4 times on 4 different occations creating those little boards was a waste of your time and money, as they dont control that. But hey, what would i know  The part that says Barco or SEOS or in my case SKYVISION can be make to say anything you want it to say. Greg Eisemann can program that, but it has absolutely nothing to do with the operating software. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 18, 2015 6:04:40 GMT -5
Perhaps 3.12 works better with newer controllerboards? Perhaps the older boards work better with the older software? I advice people to be careful with flashing backwards at this point. I heared my 2.21 software on the older controller spin the fans up now and than and it was much noisier. Exact same machine only the controller was changed. That is al I know.  R7631255-03 It has an extra 5 at the end. The older controller has number R763125. I will probable try putting cinemax 2.20 on the controller with 2.21 to see what happens. |
|
|
|
Post by dummyload on Nov 18, 2015 6:26:55 GMT -5
Second thoughts ,the important thing about this method is that we can bring a board with data corruption (or lost of data) back alive. (and great help in fault finding)
@ Redfox ,groningen is way too far for me i wait for now, until an opportunity arises.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 18, 2015 6:34:41 GMT -5
Second thoughts ,the important thing about this method is that we can bring a board with data corruption (or lost of data) back alive. (and great help in fault finding) @ Redfox ,groningen is way too far for me i wait for now, until an opportunity arises. I know Hulio lives closer to you. I do not know if he still has a 3.12 controller? |
|
|
|
Post by Decibel on Nov 18, 2015 13:18:44 GMT -5
I would to save Cinemax software from an apparently dead controller.
Can I send the board dummyload?
I have a willem programmer.
Can you show the layout of diy program cable?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 18, 2015 14:23:38 GMT -5
Second thoughts ,the important thing about this method is that we can bring a board with data corruption (or lost of data) back alive. (and great help in fault finding) @ Redfox ,groningen is way too far for me i wait for now, until an opportunity arises. He I also do not completely understand. With a working 3.12 controller you could only read halve of the data if I understand correct? Is that useful somehow? Ah ok I read again. You can read the flash from a working controller and put it on another controller. And we would need a eeprom programmer to use these files. Is that Willem programmer form Decibel usefull? |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 18, 2015 14:38:49 GMT -5
I would to save Cinemax software from an apparently dead controller. Can I send the board dummyload? I have a willem programmer. Can you show the layout of diy program cable? You might better send the board to Dummyload? |
|
|
|
Post by hulio on Nov 18, 2015 18:02:10 GMT -5
Second thoughts ,the important thing about this method is that we can bring a board with data corruption (or lost of data) back alive. (and great help in fault finding) @ Redfox ,groningen is way too far for me i wait for now, until an opportunity arises. I know Hulio lives closer to you. I do not know if he still has a 3.12 controller? No, i don't. My both controllers have Cine 9 V2.21 now. I had V3.11 and now is overwrittten. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 18, 2015 19:03:54 GMT -5
Ok we should help each other some way. I see Dummyload has an older controller judging from the Altera chip I see. Do you have a new controller version?
|
|
|
|
Post by hulio on Nov 18, 2015 22:54:48 GMT -5
I taught they all have the same lay-out. I'll have to look tomorrow. All i know is that both controllers had V3.11 and 3.12 from Barco themself.
|
|
|
|
Post by Casethecorvetteman on Nov 19, 2015 1:29:50 GMT -5
I taught they all have the same lay-out. I'll have to look tomorrow. All i know is that both controllers had V3.11 and 3.12 from Barco themself. So did mine. And they look pretty much identical. |
|
|
|
Post by Casethecorvetteman on Nov 19, 2015 1:30:14 GMT -5
I know Hulio lives closer to you. I do not know if he still has a 3.12 controller? No, i don't. My both controllers have Cine 9 V2.21 now. I had V3.11 and now is overwrittten. No loss there mate. Big step up. |
|
