Cinemax fan fail

Decibel Master Tech Roma - Italy Posts: 665	Cinemax fan fail Feb 13, 2017 7:19:56 GMT -5 via Tapatalk Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Decibel on Feb 13, 2017 7:19:56 GMT -5 The interface have a jumper with two position. One position is "frame". Other position is "conv".
	Barco Cinemax

dummyload
Full Member

Posts: 188

Cinemax fan fail Feb 13, 2017 13:48:23 GMT -5 Decibel likes this

Quote

Post by dummyload on Feb 13, 2017 13:48:23 GMT -5

When board is used for horz. fan jumper must be set to frame and connector j41 must be used to connect.
When used in the tray the jumper must be set to conv and connectors j2 and j85 are used to connect.
So jumper must be set the same for cine9 or 909.

Looking at the schematics of the board putting the jumper to conv while used for horz. fan ,nothing can go wrong with the board but
horz. fan wil always spin ful speed and projector wil give a fan fail message and shut down.
I just did the test to see if theory is correct and yes it is.

So the extra connectors and jumper are of no need when board is used for horz. fan.

Decibel Master Tech Roma - Italy Posts: 665	Cinemax fan fail Feb 13, 2017 15:45:46 GMT -5 via Tapatalk Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Decibel on Feb 13, 2017 15:45:46 GMT -5 Ok thank you
	Barco Cinemax

Casethecorvetteman Master Tech Posts: 1,219	Cinemax fan fail Feb 16, 2017 8:25:23 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Casethecorvetteman on Feb 16, 2017 8:25:23 GMT -5 The one in my 909 doesnt have a jumper at all.

albertto: Hi everyone. This is my first post here, so greetings to everyone. I hope to help and get helped in my diy prjects or other stuff. Thank you in advice!! Nov 2, 2024 12:45:30 GMT -5 *

zerolearner: Hi team members I'm new to the forum. I have denon X2000 firm issue I replaced the new ADSP IC but upload the firmware via USB port I got a error message connection failed 5A. FLAG0 present 0.84V is there any JTAG programmer for update the firmware. Sept 30, 2024 22:36:28 GMT -5

redpill: Would you able to provide more details in regards to your fix. Did you replace faulty unit or fixed yourself? I'm having similar problem and wonder how to approach it. Thanks. Lucas. Sept 8, 2024 1:10:29 GMT -5

Post by Decibel on Feb 13, 2017 7:19:56 GMT -5

Post by dummyload on Feb 13, 2017 13:48:23 GMT -5

Post by Decibel on Feb 13, 2017 15:45:46 GMT -5

Post by Casethecorvetteman on Feb 16, 2017 8:25:23 GMT -5

Shoutbox